Cold Rolled Polished Hardened and Tempered SAE 1075 Spring Steel Strips for Making Bandsaw Blade

Product Description

We manufacture and export the following specifications:

hardened and tempered steel strips/coils/sheet

cold rolled annealed steel strips/coils/sheet

c67s, c70s, c75s C95S C100S high carbon spring steel strip

C50s, c55s, c60s medium carbon steel strip

50CrV4, 51CrV4, 60Si2Mn alloy steel strip
SK5, SK85, SK95 alloy steel strips

AISI420 stainless steel strip

Steel Strip Application:

Material grades available for the following process:

C50S, C55S, C60S, C67S, C70S, C75S, C80S, C95S, 50CrV4, 51CrV4,
SK5, 60Si2Mn, SK5 (SK85), 65G
sae1045, sae1050, sae1060, sae1065, sae1070, sae1075, sae1095
CK45, CK50, CK55, CK60, CK67, CK70, CK75, 65Mn, 50#, 60#, T8, T10
Stainless steel: 301 304 201 420 430

Hardened and tempered steel strips

Thickness: 0.10mm-2.5mm
Width: 2mm-300mm
Hardness: 29-55HRC
Surface: blue, white, black, polished etc.
Edge: slit, round, sheared
Applications: these strips are widely used for making saw blade, steel springs, coil springs, steel for masonary tools which do not require severe bending or forming

Cold Rolled Polished Hardened and Tempered SAE 1075 Spring Steel Strips for Making Bandsaw Blade

Cold Rolled Polished Hardened and Tempered SAE 1075 Spring Steel Strips for Making Bandsaw Blade

Cold rolled annealed steel strips

Thickness: 0.10-6.00mm
Width: 2mm-1200mm
Hardness: below 19HRC
Surface: nature, bright finish
Edge: slit, round, sheared
Applications: widely used for making springs, washers, spacers, clips, pin, inserts, etc.

Cold Rolled Polished Hardened and Tempered SAE 1075 Spring Steel Strips for Making Bandsaw Blade

Spring steel strip for rolling shutter door

blue spring steel + hardened and tempered conditions
Thickness: 1.0mm-1.6mm thickness
Width: 40mm-80mm width,
Surface: polish blue, grey blue
Edge: round
MOQ 2tons for each size
good quality and excellent elasticity

Cold Rolled Polished Hardened and Tempered SAE 1075 Spring Steel Strips for Making Bandsaw Blade

Bandsaw blade steel strips

Bandsaw steel strip produced by Guang WEI YOU LIANG ARE are widely used in wood cutting saw, cutting tool, stone saw blade, which has good flatness, straightness and high fatigue resistance that can withstand high and continuously changing loads and vibrations.

C75, C75Cr1, SK5, 51CrV4 with the following dimensions
Thickness: 0.15mm up to 3.00mm
Width: 2mm to 300mm
Hardness: 44-46HRC, 47-45HRC, 43-45HRC
Surface: blue, bright, polish, yellow, white
Edge: slit, sheared, round both sides

Cold Rolled Polished Hardened and Tempered SAE 1075 Spring Steel Strips for Making Bandsaw Blade

STEEL STRIPS ----- QUALITY, ACCURACY, CUSTOMIZATION
Our factory is a leading supplier of high carbon steel strip, strip alloy steel strip and stainless steel in two forms- hardening heat treatment & tempering conditions and cold rolled annealing conditions. Occupying 25,000 square meters of production area, we have more than 110 employees, including senior technicians, 30 mid-level technical personnel as well as a series of facilities including acid washing machine, cold rolling machine, heat treatment , cutting, cutting, quenching and tempering, mechanical polishing, straightening machine, edge treatment, etc., to hold very tight thickness & width & leveling
Tolerances, decambering, deburring and round edging for safety applications. Strips are manufactured to the highest industry standards in a wide range of chemicals, sizes, moods, and finishes to satisfy your custom request.

Packing

Packaging Details: Each package with anti-rust paper and light oil, then wrapped in plaster film and put in 20ft forstandard container worthy of the sea

Delivery details: 20-30 days after receiving the prepayment